Dirak India Panel Fittings Pvt. Ltd.

• Heavy duty latch system with PA handles and bezels.
• Instead of bezels you can use the steel bearing-plate 232-0404 with bezel 232-0405 as product system 6-300 (both steel, zinc plated.
• Cutout see product system 6-296.
• Water- and dust-tight according to IP65 DIN EN 60529 by:O-ring 232-1501 and Flat external seal oval 232-1401 or Flat external seal round 232-1402 depending on the bezel, see Product system 6-296

• Handle in- and outside PA, black
• Handle core for a1 and e1 steel, zinc plated
• Bezel PA, black
• Cam zinc die
• Shaft steel, zinc plated

• The versions 259-9101 and 259-9102 have an additional lock mechanism/release.
• The keepers are included.
• The surface of the latches is satin polished.

• Over center toggle latch stainless steel AISI 304

Our company is one of the most specialized companies working in the area of Compression Latches in a wide range of designs, shapes and patterns according to our customer's demand. These latches are made by upgraded technology and innovative ideas of our professionals of this field with quality material. Lastly, our customers can easily avail these latches at customized prices in market.

Features:

• Elegant Compression Latch
• Low profile design
• The Compression Latch will be screwed into the cutout with the pre-assembled cam
• Clamping grip 6.5 mm (0.256)
• Vibration-proof
• The colored marking on the casing top represents the opened/closed position in form of a padlock
• The installation depth in opened position is 59 mm
• Water- and dust-tight according to IP65 DIN EN 60529
• RH and LH version
• The H-dimension is pre-defined via different cams. Further H-dimensions upon request
• Grounding by single sided grounding nut

Material:

• Housing, insert and cam: zinc die, chrome plated
• Plug: PA6, black
• O-Rings and flat external seal: NBR
• Serrated lock washer: steel, zinc plated

• Rod Latch system for profile-cylinders to DIN 18252. Heavy duty version.
• Screw-in or weld-on.
• Maximum bolting torque for the M5 screw 3.5Nm!
• Water and dust-tight according to IP65 by using O-ring 200-1001 and flat external seal 200-0901

• Rod Latch steel, zinc plated and zinc die
• Lock support steel, zinc plated
• Insert zinc die, chrome plated
• Escutcheon zinc die, chrome plated
• Rod Guide PA, black
• Round rods steel, zinc plated

• This patented unique compression latch PHZ combines design and functionality and provides a smooth closing action.
• An ergonomically designed lock cover and magnet supported cylinder flap.
• Innovative locking solution on the inside of the door as a single point latch.
• The key inserted into the profile-cylinder opens and closes the lock according to DIN 18252.
• The key is removable only in the locked position.
• Grounding with set screw DIN 914 Incl..
• Water- and dust-tight according to IP65 DIN EN 60529.
• Version DIN RH as shown, Version DIN LH on request

• Housing, slider and cam zinc die, zinc plated
• Lock cover zinc die, matt chrome plated
• Other surfaces on request
• Clamp zinc die, untreated
• Seal for cylinder flap CR
• Roller POM, black
• Washer, retaining clip, fastening screws and set screw steel, zinc plated
• Gear cover PA6, black
• O-rings NBR, black

• This Flush Slam Latch is suitable for applications where corrosion protection is needed.
• The Latch is made completely of stainless steel.
• The flush design makes this latch suitable for all applications where safety is needed and where only a limited space is available.
• The hollow space below the lever allows an easy access for operating the lever.
• The latch can be unlocked one-off or permanent.
• For a one-off unlocking the lever has to be opened about 45°, the spring loaded lever automatically returns to the flush position.
• For a permanent unlocking pull the lever upwards over 45° over center, this unlocks the latch and it stays in position "unlocked".
• Pushing the lever, brings the latch back to position "locked".
• The inside catch includes a device for unlocking from inside.
• S-dimension 3 to 21mm. Leaving out the front spacer increases the S-dimension by 3.4mm. The included screw has to be shortened accordingly.

• Housing, handle and latch AISI 316, surface polished
• Screw, cam angle, pin and spring stainless steel
• Spacer nylon, black

• Cam can be turned over and can be fastened at any 45° angle
• Easy to fit
• Resistant against corrosion

• Heavy Duty Handle.
• RH or LH application.
• Cam can be turned over and can be fastened at any 45° angle.

• Handle, cam, base plate and hook EN-GJMW-400-5 DIN EN 1562, zinc plated
• Shaft steel, zinc plated

Our company is widely appreciated in the domain of Stainless Steel Compression Latches. We deal in a variety of these latches in different specifications of designs and dimensions according to our orders and customer's demands. These latches are made by using expert knowledge and best quality material from reliable vendors. Besides, these Stainless Steel Compression Latches are offered for sale in the market at competitive prices for our precious customers.

Features:

• Elegant Compression Latch
• Low profile design
• Clamping grip 6 mm (0.236)
• Vibration-proof according to DIN EN 61373
• Dots are marked in color on the housing top open/closed in the shape of a padlock
• Installation depth in uncompressed condition, 48 mm (1.890)
• Water- and dust-tight according to
• IP67 DIN EN 60529
• RH and LH version
• The H-dimension can be varied via the cranking of the cams
• If using the dustcap (product system 1-270) the H-dimension changes by 2 mm (0.079)

Material:

• Housing, insert, axle and nut: stainless steel AISI 316
• Cam and serrated screw: stainless steel AISI 304
• O-Ring: NBR

Specifications:

• Low-profile lever-actuated compression latch clip-in.
• To release, lift lever and turn.
• To close, turn and fold lever down.
• When closed, the cam is held in place using detents.

• The latch comes pre-assembled and can be installed into the cutout.
• (S) = 5/0.197 to 5.5mm/0.217

• With this bracket and an M5x20 countersunk screw, an (S) -dimension of 0 to 3.5mm / 0 to 0.138inch can be achieved.
• H-dimension 24mm/0.945inch.

• Compression latch PA
• Spring spring steel
• Pin, Bridge and screw steel, zinc plated

• Poly-amide heavy duty latch with handle on outside.
• Instead of bearing d and bezel e you can also use the round poly-amide bezel e.g. 232-0401 or poly-amide bezel 232-0402 09 see product system 6-296.

• Handle outside PA, black
• Core for a1 steel, zinc plated
• Locking cam aluminium
• Spacer, bearing plate, bezel, locking stub and shaft, complete steel, zinc plated

• Locking bar system for heavy doors.
• The bar is supplied complete.
• Both ends come ready to be connected to the handle mechanism.
• By cutting the bar, the handle mechanism can be installed in any position.

• Handle mechanism with base plate, bar guides and bars steel,zinc plated

• Locking system for industrial application.
• Secure tightening and locking of two components.
• Eyelet for padlock.
• The catch is included in the scope of delivery.

• Toggle-Latch stainless steel AISI 304

• This patented unique 2-point latch PHZ combines design and functionality and provides a smooth closing action.
• No protruding handle or knob.
• Perfectly suited to control fl at rods.
• The key inserted into the profile-cylinder opens and closes the lock according to DIN 18252.
• Closing- and opening operation 180°.
• The key is removable only in the locked position.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Version DIN RH as shown.Version DIN LH on request.

• Housing, housing cover and slider: zinc die, zinc plated
• Screws: steel, zinc plated
• O-rings: NBR, black
• Flat external seal: EPDM, black
• Flat rod: steel, zinc plated

• This patented unique 2-Point Latch PHZ combines design and functionality and provides a smooth closing action.
• An ergonomically designed lock cover and magnet supported cylinder flap.
• Perfectly suited to control flat rods.
• The key inserted into the profile-cylinder opens and closes the lock according to DIN 18252.
• Closing- and opening operation 180°.
• The key is removable only in the locked position.
• Grounding with set screw DIN 914 incl.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Version DIN RH as shown, Version DIN LH on request.

• Housing and slider: zinc die, zinc plated
• Clamp: zinc die, untreated
• Lock cover: zinc die, matt chrome plated

• O-rings NBR, black
• Seal for cylinder flap CR
• Fastening screws and set screw steel, zinc plated

• Can be installed into the cut-out
• H-dimension 24mm/0.945inch
• Easy to fit

• This patented unique compression latch combines design and functionality and has a smooth closing action.
• No protruding handle or knob.
• Innovative locking solution on the inside of the door as a single or multi-point latch see product system 6-510.
• Perfectly suited to control flat rods.
• Closing- and opening operation 90°.
• 1300N of force per latching point.
• Water- and dust-tight according to IP65 DIN EN 60529.

• Housing, slider and cam zinc die, zinc plated
• O-rings NBR, black
• Washer, retaining clip and fastening screws steel, zinc plated
• Roller POM, black
• Shoulder bolt stainless steel
• Insert zinc die, chrome plated
• Gear cover PA6, black
• Connecting rod steel, zinc plated

• Rod Latch system heavy duty version, screw-in or weld-on.
• For round rods Ø8mm.
• Water and dust-tight according to IP65 by using O-ring 200-1001 and flat external seal 200-0901

• Rod Latch steel, zinc plated and zinc die
• Lock support steel, zinc plate
• Insert zinc die, chrome plated
• Escutcheon zinc die, chrome plated
• Rod Guide PA, black
• Round rods steel, zinc plated

• This patented unique compression latch PHZ combines design and functionality and provides a smooth closing action.
• No protruding handle or knob.
• Innovative locking solution on the inside of the door as a single point latch.
• The key inserted into the profile-cylinder opens and closes the lock according to DIN 18252.
• 1300N of force at the latching point.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Version DIN RH as shown Version DIN LH on request.

• Housing, housing cover, slider and cam zinc die, zinc plated
• Roller POM, black
• Washer, retaining clip and fastening screws steel, zinc plated
• Shoulder bolt stainless steel
• Gear cover PA6, black
• O-rings NBR, black
• Flat external seal EPDM, black

• Locking pin with spring-loaded handle.
• Tool-less assembly.
• Allows locking of covers and flaps in defined positions.
• Can be used as locking device for drawers.
• Large handle.
• Also usable as hinge.
• Flexible use for material thicknesses from 1 to 13 mm.

• Pin zinc die, zinc plated
• Handle PA, green
• Spacer PA, black

• Installed using a simple push into the cut-out
• Large, ergonomically designed handle for ease of use
• Lids and covers can be stopped and locked at predetermined positions

• Locking pin with spring-loaded handle.
• Installed using a simple push into the cutout.
• Lids and covers can be stopped and locked at predetermined positions.
• Can be used as a locking device for drawers.
• Large, ergonomically designed handle for ease of use.

• Housing PA, black
• Handle PA, green
• Pin steel, zinc plated
• Spring steel, zinc plated

• Unit for explosion-tight doors.
• This system can also be controlled by a swing-handle with a profile-cylinder.

• Housing zinc die, steel, zinc plated
• Escutcheon PA, black
• Insert zinc die, chrome plated
• Rod: steel, zinc plated
• housing zinc die, steel, zinc plated
• Lock support steel, zinc plated
• Insert zinc die, chrome plated
• Escutcheon zinc die, chrome plated
• Round rods steel, zinc plated
• Weld-on U-bracket 215-0101 and 215-0101.00-00001 steel, untreated
• Frame-part eye 215-0201 steel, untreated
• Screw-on eye 215-0401 steel, zinc plated
• Connecting pin 215-0501 and fixing pieces steel, zinc plated
• Link 215-9101 zinc die
• Special version on request

• Rod latch without central cam with 31.4mm 1.236 stroke at 180° rotation.
• Accessories see product system 1-400, swinghandles see product system 2-300, T- and L-handles see product system 1-430.

• Housing steel, zinc plated
• Gear and connectors zinc die, chrome plated

• Hooked cam with free stroke.
• Version LH, hook RH.
• Version RH, hook LH.
• Opening angle of the hook 15°.
• Lock support not included.

• Sliding  latch: steel, zinc plated
• Cam steel, zinc plated
• Plug PE, black
• Lock support steel, zinc plated

• This patented unique latching device combines design and functionality and provides a smooth closing.
• Innovative latching device is on the inside of the door.
• The latching devices can be connected by connecting rods.
• 1300N of force per latching device.

• Housing, slider and cam zinc die, zinc plated
• Cover PA6, black
• Washer and retaining clip steel, zinc plated
• Roller POM, black
• Shoulder bolt stainless steel
• Serrated screw and fastening screws: steel, zinc plated