Metal Hinges

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• RH and LH application.
• 120° Opening angle.
• Fitting hardware included.

• Frame-part and door-part zinc die, zinc plated
• Fastening clip and pin steel, zinc plated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• The 2 main hinge parts have a central guide to prevent door sagging during adjustment.
• RH or LH application.

• U-part steel, zinc plated
• Z-part and frame-part steel, untreated
• Pin steel, zinc plated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• The 2 main hinge parts have a central guide to prevent door sagging during adjustment.
• RH or LH application.
• 90° Opening angle

• U-part steel, zinc plated
• Z-part steel, untreated
• Pivot steel, untreated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• 120° Concealed hinge for surface mounted door.
• RH or LH application.
• 120° Opening angle.

• Frame-part steel, zinc plated
• Door-part steel, untreated
• Pin steel, zinc plated
• O-Ring NBR

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors.
• Hinge concealed.
• Bending 23mm.
• Door-part weld-on.
• RH and LH application.
• Opening angle 120°.
• 1. Installations instruction for fastening washer.

• Frame-part, pin and fastening washer steel, zinc plated
• Door-part steel, untreated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• 130° Hinge SNAP-LINE, concealed, for H.D. applications.
• RH or LH application.
• By pulling the pin upwards (or downwards), the door-part of the hinge is released and the door can be removed.
• The pin engages to the wire springs at the frame-part and so it is captive.
• Depending on the shown options, the captive pin is pre-assembled from the top or upside-down.
• Installation by a simple push into the cutout.
• The O-ring for IP65 DIN EN 60529 is included.
• The oblong hole in the door-part allows vertical adjustment ±5mm of the door.
• Version with door-part for quick push-on installation: refer to product system 4-125SL.
• Stainless steel version see product system 7-164SL.
• 130° Opening angle.

• Frame-part zinc die, untreated
• Door-part steel, zinc plated
• Pin steel, zinc plated
• Snap wedges sintered metal, coated
• O-Ring NBR

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• 130° Hinge SNAP-LINE, concealed, for H.D. applications.
• RH or LH application.
• By pulling the pin upwards or downwards, the door-part of the hinge is released and the door can be removed.
• No tools needed. Just push the door onto the pin of the frame-part.
• The pin engages to the wire springs at the frame-part and so it is captive.
• Depending on the shown options, the captive pin is pre-assembled from the top or upside-down.
• The frame-part is installed by a simple push into the cutout.
• The O-ring for IP65 DIN EN 60529 is included.
• Front release with a screwdriver blade size 0.354x0.059 inch. Release from behind: use the standard DIRAK tool for uninstallation.
• Version with removable door-part refer to product system 4-124SL.
• Stainless steel version see product system 7-164SL.
• 130° Opening angle.

• Frame-part zinc die, untreated
• Door-part and slider zinc die, zinc plated
• Pin steel, zinc plated
• Snap wedges sintered metal, plated
• O-Ring NBR

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Hinge for surface mounted doors.
• Concealed.
• 120° Opening angle.
• Two different fastenings on the door:
• Door-part to be weld-on on the door leaf.
• Door-part to be weld-on on the door bending.
• RH and LH application.
• Frame-part screw-on e.g. cross recessed raised cheese head screw M6 DIN-EN-ISO 7045.

• Door-part steel, untreated
• Frame-part steel, zinc plated
• Pin steel, zinc plated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• 120° Concealed hinge for surface mounted door.
• RH or LH application.
• The hinge can also be supplied with a self-securing POM pin which can be mounted upside-down for very short enclosures.
• Door-part screw-on or weld-on.
• Frame-part screw-on.
• 120° Opening angle.

• Frame-part steel, zinc plated
• Door-part steel, untreated
• Pin steel, zinc plated
• Pin POM natural
• O-ring NBR

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

We are offering of Control Panel Hinges. Appreciated by our customers due to their best grade materials and high strength, these are available in varied length. These are well designed with modern technology by our highly skilled professionals.

Features:

• 180° Polyamide Hinge with self-securing pin used to control cabinet doors or machine flaps
• RH or LH application

Material:

• Frame-part and door-part: PA, black
• Pin: POM natural

Specifications:

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

Our company has created niche in providing Torque Hinges with elegant designs and accurate dimensions. Widely used across the industries, homes and these are fabricated according to the customer needs. In manufacturing process of these hinges we use corrosion proof materials which are sourced from reliable vendors. In addition to this, these hinges are quite durable, efficient and have excellent performance.

Features:

• 270° Hinge with unchanging torque throughout its full range of motion
• Continuously adjustable torque 0–5Nm
• The adjustment of the torque is made with a hexagon socket key size 4 in the hinge shaft. The doors may be moved into any position and remain at exactly that position. Also usable as cover stays for light duty application. Installation with hexagon screws or hexagon nuts M6
• Without any engagement
• Torque adjustable
• Constant torque throughout its fully range of motion
• RH and LH application
• Applications: shutters, doors protection devices, cover for industrial enclosures, HVAC, electrical industry, machine tools and instrumentation

Material:

• Hinge and covers: PA, black
• Pin: stainless steel

Specifications:

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors for single cabinets.
• Hinge partly visible.
• RH / LH application.=
• The door-part has 2 stubs, keeping it in position during mounting of the pin.
• This hinge is fully interchangeable with the hinge shown on product system 4- 160

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors.
• Hinge concealed.
• RH / LH application.
• Pin secured by bushing.
• Fastening material included.

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors.
• Hinge concealed.
• Door bending 23 mm.
• RH / LH application.
• 120° Opening angle.
• By rotating the 1/4 turn, the pivot pin is released and the door can be removed by pulling it to the front (see 2. and 3.).

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Screw-on / weld-on hinge.
• For nested doors.
• Hinge visible.
• RH / LH application.
• 180° Opening angle.

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Screw-on Hinge 40x40mm with molded in countersunk screws M5.
• For nested doors.
• Hinge visible.
• RH and LH version.
• 180° Opening angle.
• Lift-off. The O-Rings for IP65 DIN EN 60529 are included

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Hinge 40x40mm SNAP-LINE.
• The installation is effected by a simple push into appropriate cutouts.
• Other data and dimensions see product system 4-250.
• 180° Opening angle.

• Hinge halves zinc die, black
• Pin stainless steel
• Snap wedges sintered steel, zinc plated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Screw-on hinge.
• RH or LH application.
• 270° Opening angle.

• Hinge halves zinc die, chrome plated or black
• Pin stainless steel

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

Our company is among the very well-known companies in the field of offering Concealed Hinges. Available in variegated ranges and these hinges are widely demanded for their user friendly nature and light weight. Along with this, these are made and designed by using the latest technology. Besides, our experts provide sturdy constructions and durable standard of these hinges. Last but not the least, these hinges have leading industrial rates.

Features:

• Concealed Hinge for nested door
• RH and LH application
• 120° Opening angle

Material:

• Frame-part and door-part: zinc die, zinc plated
• Fastening clip and pin: steel, zinc plated

Specifications:

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Hinge 40x40mm SNAP-LINE.
• The installation is effected by a simple push into appropriate cutouts.
• Other data and dimensions see product system 4-250.
• 180° Opening angle.

• Hinge halves zinc die, black
• Pin stainless steel
• Snap wedges sintered steel, zinc plated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

We are the major provider of Cabinet Door Hinges which are available in various specifications. Fully customizable, these hinges are ideally suited for all types of doors. Manufactured from best quality materials, these hinges are known for their resistant to corrosion and abrasion properties. In addition to this, these are available in mesmerizing ranges, shapes and sizes. Last but not the least, these hinges are offered at pocket friendly rates.

Features:

• 180° Hinge for surface mounted door
• RH or LH application

Material:

• Frame-part and door-part: zinc die, chrome plated or black coated
• Washer: brass, nickel plated
• Pin: steel, zinc plated or POM, natural

Specifications:

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• 180° Hinge SNAP-LINE for surface mounted door for adjacent cabinets.
• RH or LH application.
• 180° also with adjacent doors/hinges.
• Closed cutout.
• Installation of the frame-part by simple push into the cutout.
• Water- and dust-tight according to IP65 DIN EN 60529 by using the O-ring not included.

• Frame-part and door-part zinc die, black
• Pin steel, zinc plated
• Pivot pin steel, zinc plated
• Washers brass, nickel plated
• Snap wedges sintered metal, coated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• 180° Hinge SNAP-LINE.
• Lift-off.
• Frame-part screw-on, door-part snap-in.
• RH or LH application.
• The frame-part can be fitted from outside and from inside.
• The installation of the door-part, with already pre-fitted pin-halves, is achieved by a simple push into the appropriate cutout.
• To merge the door-part and the frame-part at about 30° door opening, enter the door-part into the matching openings in the frame-part.
• Close the door and fully push the pin-halves towards each other.
• After retracting the pin-halves, the door can be pulled out horizontally at about 30° door opening.
• Special wire springs, fitted into the door-part, make the pin-halves captive and the pin-halves have a detent in both positions.
• 180° Opening angle.

• Frame-part, door-part and pin zinc die, black
• Snap wedges sintered metal, coated
• Detent spring spring steel

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors for adjacent cabinets.
• Hinge partly-concealed.
• Door bending 20mm.
• RH and LH version.
• 180° opening angle. Tool-less installation of frame- and doorpart. ▪ Door can be lifted-off at 30° opening angle.
• Lift-off safety, the door can't be lifted-off in closed position.
• IP65 according to DIN EN 60529 by flat external seal.

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Screw-on hinge for flush door construction.
• For nested doors.
• Hinge visible.
• RH / LH application.
• 180° Opening angle. M6 stud, 3 nuts and serrated washers are included

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Small elegant hinge.
• 180° Opening angle.
• Installation by a simple push into the cutout.

• Hinge parts zinc die, matt chrome plated or black
• Pin stainless steel
• Snap wedges sintered steel, zinc plated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Small elegant hinge.
• 180° Opening angle.
• To be mounted by simple pushing into appropriate cutouts and by screws.
• With the screw fastened versions countersunk screws according DIN 7991 or according DIN EN ISO 10642 can be used.
• Adjustments are possible with respective bores provided.
• The nut plate can be mounted in different ways, according to the application. (Please order separately)
• Countersunk screws are not included!

• Hinge parts zinc die, matt chrome plated or matt black
• Pin stainless steel
• Snap wedges sintered steel, zinc plated
• Nut plate steel, zinc plated

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

Our company has gained wide spread reputation in providing Stainless Steel Hinges. Fabricated by supreme quality of stainless steel materials which purchased from trustworthy vendors, these hinges are highly effective. Adhering to the industrial criteria, these hinges are available in variegated ranges and patterns to suit the aspirations of our clients. Apart from this, these hinges are offered in various sizes, length and thickness.

Features:

• 180° Hinge for surface mounted door, with 90° lift-off
• With M6 threaded stubs for fastening from inside or Ø6.4 mm countersunk holes for fastening from outside
• The hinge is designed for an easy fastening to the door
• This hinge is fully interchangeable with the hinge shown on product system 4-170

Material:

• Frame-part and door-part: zinc die, chrome plated or black coated
• Pin: stainless steel
• Pin: steel, zinc plated

Specifications:

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors.
• Hinge visible.
• Lift-off.
• RH / LH application.
• Pin pressed-in. With teflon spacer for a durable, smoothrunning functional reliability

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For nested doors.
• Hinge visible.
• RH / LH application.
• 180° Opening angle. Captive pin protected against loosening and falling out.
• Tight tolerance in knuckles ensures proper alignment.
• 6-part knuckle pin assembly.
• Lightweight.
• Corrosion resistant.
• Rounded edges.

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors.
• Hinge concealed.
• Door bending 18mm.
• RH / LH application.
• 120° Opening angle.
• Hinge pin secured by bushing.
• Frame-part with force fitted stud M5 x 12. Door-part weld on with prepared welding spots.

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• Hinge with DIRAK-SNAP-Technology for adjacent cabinets.
• Tool-less installation of door-part and frame-part.
• For surface mounted doors.
• Hinge partly visible.
• Door bending 25mm.
• RH / LH application.
• 180° Opening angle. Dual hook with DIRAK-SNAP-Technology see product system 3-910DST.
• IP65 according to DIN EN 60529 by using the o-ring (not included)

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors.
• Hinge visible.
• Version a) lift-off.
• 180° Opening ang

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted door.
• Hinge visible.
• Version lift-off.
• RH / LH application.

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

Our company has gained immense popularity for offering superior quality of 180 Degree Hinges. The product range provides by us complies with the industry laid parameters. Further, these are manufactured using high grade aluminum material and have smooth finishing. Known for their customized view and enchanting designs, these offer excellent performance and are available at efficient prices. Finally, these three are quite easy to install.

Features:

• 180° Hinge for surface mounted door, with 90° lift-off
• With M6 threaded stubs for fastening from inside or Ø6.4 mm countersunk holes for fastening from outside
• The hinge is designed for an easy fastening to the door
• This hinge is fully interchangeable with the hinge shown on product system 4-170

Material:

• Frame-part and door-part: zinc die, chrome plated or black coated
• Pin: stainless steel
• Pin: steel, zinc plated

Specifications:

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors for adjacent cabinets.
• Hinge partly visible.
• Door-bending 20mm.
• RH / LH application.
• 180° Opening angle. This hinge is completely interchangeable with the hinge on product system 4-150.
• Attention: The shifted pivot point gives a larger radius.
• The POM pin is self-locking.

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• 180° Hinge for surface mounted door for single cabinets.
• RH and LH application.
• Installation of the frame-part by simple push into the cutout.
• Water- and dust-tight according to IP65 DIN EN 60529 by using the O-ring not included.

• Frame-part and door-part zinc die, matt black
• Pin steel, zinc plated, stainless steel AISI 304 or POM product system 6-050
• Snap wedges sintered steel, zinc plated
• O-Ring NBR, black

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For surface mounted doors for adjacent cabinets.
• For adjacent cabinets.
• With 90° lift-off.
• RH and LH version.
• 180° Opening angle. With M6 threaded stubs for fastening from inside or Ø6.4mm countersunk holes for fastening from outside.
• The hinge is designed for an easy fastening to the door.
• This hinge is fully interchangeable with the hinge shown on product system 4- 170.
• Hinges for door-thickness > 2mm see product system 4-183.

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

Our company has been applauded in providing Door Hinges. Appreciated by our customers due to their best grade materials and high strength, these are available in varied length. These are well designed with modern technology by our highly skilled professionals. To add on, these hinges give outstanding functionality for long period time. Last but not the least, these hinges are obtained at very competitive prices to our dear clients.

Features:

• 180° Polyamide Hinge with self-securing pin used to control cabinet doors or machine flaps
• RH or LH application

Material:

• Frame-part and door-part: PA, black
• Pin: POM natural

Specifications:

Click to Zoom

Ask for Price

Price on Request: Get Latest Price

• For suface mounted doors for adjacent cabinets.
• Hinge partly visible.
• Door-bending 25mm.
• For RH/ LH application.
• 180° Opening angle.
• Easy lift-off through oblong holes (2.).
• Hinge fitting from inside and outside. Frame holes layout is also suitable for mounting dual hooks as on product system 3-170 and 3-910 shown allowing reversibility of door.
• Hinges are supplied including fastening material (5.).