Dirak India Panel Fittings Pvt. Ltd.

• Handle outside.
• Without lock, with cylinder barrel or insert.
• Suitable for different door thicknesses. IP65 according to DIN EN 60529 by sealing kit.
• Outout see product system 6-280.05. Handle inside see product system 6- 280.01.
• Shafts see product system 6-280.02.
• Cams see product system 6-280.03. Compression cam see product system 6- 280.04.
• Bezels and sealing kits see product system 6-280.05.

We are a well-recognized and accomplished company dealing in top quality Stainless Steel Slam Latches all over the market. Our company gives an inclusive range of these latches in wide variety of designs and patterns as demanded by the customers. Beside this, these latches are made by latest procedures and tested several times by our industrial experts of this field. These latches are highly reliable and are available at leading rates in market.

Features:

• This Flush Slam Latch is suitable for applications where corrosion protection is needed
• The Latch is made completely of stainless steel
• The flush design makes this latch suitable for all applications where safety is needed and where only a limited space is available
• The hollow space below the lever allows an easy access for operating the lever
• The latch can be unlocked one-off or permanent
• For a one-off unlocking the lever has to be opened about 45°, the spring loaded lever automatically returns to the flush position
• For a permanent unlocking pull the lever upwards over 45° (over center), this unlocks the latch and it stays in position "unlocked"
• Pushing the lever, brings the latch back to position "locked"
• The inside catch includes a device for unlocking from inside
• 1 -dimension 3 to 21 mm. Leaving out the front spacer increases the 1 -dimension by 3.4 mm. The included screw has to be shortened accordingly

Material:

• Housing, handle and latch: AISI 316, surface polished
• Screw, cam angle, pin and spring: stainless steel

Specifications:

• Specially developed stainless steel Hygiene Compression Latch HD, Hygienic Design with insert square SW13.
• Insert and cam are certified for direct contact with food inside and outside of the enclosure.
• Mechanism and screwing completely encapsulated.
• Tested according to: GS-NV 2:2013/06 Principles for the testing of food processing machines GS-NV 6:2013/06 Principles for the testing of hygiene requirements. Machine Ordinance: DIN EN 1672-2:2009.
• DGUV Test Certificate NV 13090.
• Main area of application is the food and hygienic sector.
• Dirt resistant and easy to clean by means of polished surface and transition radii.
• Vibration-proof.
• RH and LH version.
• The Compression Latch is delivered with assembled cam.
• Can be installed completely.
• 1 Operation.

• Blue, FDA conform Food and Drug Administration

• RH / LH or vertical / horizontal application. Inserts see product system 1-101, not included in delivery.
• Pull back of the bolt by rotation of the insert.
• Closing with slam-lock. Closing in locked position possible due to free stroke.

• Compact and robust Compression Latch with 3mm (0.118) compression for application inside the sealed area.
• Very low profile, only 22mm (0.866) depth in opened state.
• Fixed cam H-dimension 8mm 0.315, L36mm 1.417.
• RH and LH application.
• Matching dots mark the final position.
• A further benefit is that when the latch is opened, the door remains latched during the first 90° turn while compression is released from the seal.
• This allows any pressure inside the cabinet to escape before the door is fully opened.
• Tool-less installation in the door with a spring clip for door- thicknesses of up to 2mm 0.079.
• A pre-assembled Quarter-turn can be installed through the cutout.
• Other inserts and cams, price and delivery time on request

• Housing, insert and cam zinc die, black
• Fixing clip stainless steel
• Flat external seal NBR

• Elegant Compression Latch.
• Low profile design.
• The Compression Latch will be screwed into the cutout with the pre-assembled cam.
• Vibration-proof.
• The colored marking on the casing top represents the opened/closed position in form of a padlock.
• Water- and dust-tight according to IP65 DIN EN 60529.
• RH and LH version.
• The H-dimension is pre-defined via different cams. Further H-dimensions upon request.
• Grounding by single sided grounding nut.

• Housing, insert and cam zinc die, chrome plated
• Plug PA6, black
• O-Rings and flat external seal NBR
• Serrated lock washer steel, zinc plated

• Vibration-proof according to DIN EN 61373.
• The flap is standing upright (90°) in unlocked position.
• The open flap indicates locking position and protects against dust and water.
• The spring loaded flap first closes, when Compression Latch is closed securely.
• On request available with reflecting sticker on the inside.
• Version b) secured against unintended opening at low pressure or high-speed.
• Circumferential handle bar allows easy handling also with work- or safety gloves.
• RH and LH version.
• Flat seal damps the flap as well.

• Housing, flap, insert, grounding nut: stainless steel AISI 316Ti
• Screw, nut: stainless steel
• Spring stainless steel
• O-Ring NBR

• Compression Latch with spring loaded flap.
• Vibration-proof according to DIN EN 61373.
• The flap is standing upright (90°) in unlocked position.
• The open flap indicates locking position and protects against dust and water.
• The spring loaded flap first closes, when Compression Latch is closed securely.
• On request available with reflecting sticker on the inside.
• RH and LH version.
• Grounding by single sided grounding nut.
• The installation depth in open position is 38mm.
• The H-dimension can be varied by the cranking of the cams.

• Housing, flap and insert: zinc die, black
• Grounding nut: zinc die, untreated
• Screw, nut and spring: stainless steel
• O-Rings: NBR

• RH, LH, vertical and horizontal application.
• Installation of the cylinder depending on application.
• Key is always in the correct position.
• Cam according to DIN 18252 can be used.
• Lock support for different door bendings.
• Pull back of the latch bolt by rotation of the key.
• Closing with slam lock.
• Closing in locked position possible due to free stroke.
• Latch bolt made of spheroidal graphite cast iron to ensure high wear resistance.
• Use of lock covers possible.
• Installation with four carriage bolts or weld studs M5.

• Slam latch zinc die, zinc plated

• Elegant compression latch.
• Low profile design.
• Vibration-proof according to DIN EN 61373.
• Dots are marked in colour on the housing top open/closed in the shape of a padlock.
• Installation depth in uncompressed condition, 48mm (1.890).
• Water- and dust-tight according to IP65/67 DIN EN 60529 and IP69KDIN 40050.
• Foamed sealing PUR.
• RH and LH version.
• The H-dimension can be varied via the cranking of the cams.
• Note: Negatively bent cams can not be installed pre-assembled.

• Elegant Compression Latch.
• Low profile design.
• Vibration-proof according to DIN EN 61373.
• The colored marking on the casing top indicate the opened/closed position in form of a padlock.
• The installation depth in uncompressed condition is 69mm (2.717).
• Water- and dust-tight according to IP65/67 DIN EN 60529 and IP69K DIN 40050.
• Foamed sealing PUR.
• RH and LH version.
• The H-dimension can be varied via the cranking of the cams.
• The cam can be varied to ±6mm (0.236) via nuts (included) on the axis.
• Grounding by single sided grounding Nut.

• Housing, insert and axle: stainless steel AISI 316
• Grounding nut: stainless steel AISI 316L
• Cam, serrated washer and nuts M8: stainless steel AISI 304

• Mini Compression Latch
• 2 versions RH and LH.
• The latching and compression operation for the RH version is clockwise, for the LH version counterclockwise.
• By turning the knob, the cam is put into the latched position. Once latched, a further turning of the knob makes the cam start its compression feature.
• The knob can also be controlled by a Phillips screwdriver.
• The direction of opening/closing is clearly marked on the housing.
• Once latched, the cam for the RH version points to the right and vice versa.
• Installation by a simple push into the cutout.

• Housing zinc die, matt chrome plated
• Insert and washer steel, zinc plated
• Straight cam steel, zinc plated
• Cranked cam sintered metal
• Snap wedges sintered steel, zinc plated

• Mini Compression Latch with indicator red/green.
• The indicator stays visible and is not concealed in any fitted situation.
• 6mm compression stroke.
• In open position the indicator shows red.
• By turning the knob, the cam is put into the latched position and the green indicator appears. Once latched, a further turning of the knob makes the cam start its compression feature.
• RH and LH application.
• Installation by a simple push into the cutout.

• Housing, sleeve zinc die, matt chrome plated or black
• Knob steel, zinc plated
• Washers steel, matt chrome plated
• Spring stainless steel
• Cam sintered steel, zinc plated
• Snap wedges sintered steel, zinc plated

• Compression Latch with spring loaded flap.
• Vibration-proof according to DIN EN 61373.
• The flap is standing upright 90° in unlocked position.
• The open flap indicates locking position and protects against dust and water.
• The spring loaded flap first closes, when Compression Latch is closed securely.
• On request available with reflecting sticker on the inside.
• RH and LH version.
• Grounding by single sided grounding nut.
• The installation depth in open position is 38mm.
• The H-dimension can be varied by the cranking of the cams.

• Housing, flap and insert zinc die, black
• Grounding nut zinc die, untreated
• Screw, nut and spring stainless steel
• O-Rings NBR

• Compression Latch with spring loaded flap.
• Compression 6mm.
• Vibration-proof according to DIN EN 61373.
• The flap is standing upright 90° in unlocked position.
• The open flap indicates locking position and protects against dust and water.
• The spring loaded flap first closes, when Compression Latch is closed securely.
• On request available with reflecting sticker on the inside.
• RH and LH version.
• Grounding by single sided grounding nut.
• The installation depth in open position is 38mm.
• The H-dimension can be varied by the cranking of the cams.

• Housing, flap and insert zinc die, black
• Grounding nut zinc die, untreated
• Screw, nut and spring stainless steel
• O-Rings NBR

• For the installation, the complete latch, including the pre-assembled U-shaped fastening bracket, is installed in the cutout from outside.
• By rotating the fastening screw from outside, the U-bracket automatically fastens the complete latch.
• In the closed position the screw can not be removed.
• The adjusting screw can also beused for retro-adjusting to increase or decrease the sealing pressure.
• Attention Counternut for the adjusting screw The standard position of the counternut is underneath the lever. Refer to A. On Request the counternut can be positioned on top of the lever. Refer B. If B the max H-dimension decreases by about 4mm.
• PA version see product system 6-162.
• Vibration-proof to DIN EN 61373.

• Compression Latch zinc die, black, powder coated Other colors on request
• Clamp steel, zinc plated

Our company is one of the most sought after companies dealing in Toggle Latches in market. We offer a very wide variety of these latches throughout the market. Our latches are made from high quality material and trained expertise. These latches are commendably durable and are popular among our customers for their long life and good performance. Lastly, these Toggle Latches are available at reasonable price in market.

Features:

• The versions 259-9101 and 259-9102 have an additional lock mechanism/release
• The keepers are included
• The surface of the latches is satin polished

Material:

• Over center toggle latch: stainless steel AISI 304

Specifications:

• Snap/Push lock with slam function,
• Nut or clip fixing.
• Released by pushing.
• Larger lockable version see product system 1-500 or 1-501

• Locking system for industrial application.
• Secure tightening and locking of two components.
• Clicks into place securely.
• Slider for releasing.
• Vibration-proof.
• The catch is included in the scope of delivery.

We are a prominent and fast growing company in the field of providing best quality Compression Latches in all over the market. There is a diverse range of these latches available in a large variety of designs and patterns according to our customers. These compression latches are made from high quality material and verified technology. At the end, these compression latches are available at market leading rates for our precious customers.

Features:

• Compression latch in two versions
• Cam can be positioned at 4x90°
• Version A: Install with rivets or screws
• Adjustable H dimension
• Version B: Install with rivets or screws
• Non adjustable cam
• All versions are lockable with padlock
• Versions of Compression Latches with round housings, as drawn, however with 4 mounting holes as well as oval housings and 3 mounting holes on request

Material:

• Compression latch: zinc die, black coated or zinc plated
• Shaft: steel, zinc plated
• Cams: steel, zinc plated

Specifications:

• RH or LH application.
• HD compression latch with 4.5mm compression for application outside sealed area.
• Vibration-proof.
• The closing operation is subdivided into 2 functions.
• The first 90° turn of the actuator brings in the cam in closed position and automatically aligns a sagging door Seal not yet compressed.
• A further 90° turn pulls the door tight by 4.5mm.
• Matching dots mark the final position (see lower drawing).
• The double function is especially beneficial for pressurized enclosures.
• After the first 90° opening turn, the pressure can escape because the door is still latched.

• Housing, insert, cam, frame-part and spacer zinc die, black
• Fixing clip spring steel, zinc plated

• Profile-cylinder with lengths of 40 / 45 mm and cam acc. to DIN 18252 can be used.
• Two profile-cylinder allow opening by each cylinder without unlocking the other one.
• Use of different keys and profile-cylinders possible.
• Closing with slam-lock. Closing in locked position possible due to free stroke.

• Clip-in low profile slam latch.
• Tool-less installation. For doors and panels with a sheet metal thickness of 1.5 to 2mm.

Our company is a trusted and highly acclaimed company working in 6-122SL Snap Locks. There is a wide demand for these locks among our customers for their optimum performance and reliability. These locks are very convenient and easily available in market. Our experts use best quality material from reliable vendors as well as expertise for making these reliable locks. At the end, these locks are offered to our customers at competitive prices in market.

Features:

• Snap-lock SNAP-LINE
• This non-corrosive closing device is especially suitable for latching of doors and lids
• When the latch is released and in its final position a finger-tip grip becomes accessible to facilitate opening the door
• Vibration-proof
• Other colors and color combinations on request

Specifications:

• Flush mounted trap-door latch with integrated T-handle and safety insert.
• Can be used in any position.
• Vibration-proof design.
• T-handle locked when closed.
• T-handle with rubber stop to prevent rattling.
• Encasement surface perfectly smooth to prevent dirt deposits.
• Mounted with fastening bracket with two M6 allen screwsDIN EN ISO 4762.
• Cutout with anti-twist safeguard.
• Also available without locking device only flush-mounted T-handle.
• The door strength amounts to max. Ts=6mm 0.236 with the screw provided M6x16 .
• Only for use with cams part-no. 200-06XX und 200-04XX verwenden

• The latch can be combined with escutcheons, handles or Swinghandles.
• RH or LH application throug double symmetry.
• Detailed dimensions of the cutout PrB see product system 3-010.

• Rods steel, zinc plated
• Pinion sintered metal
• Housing zinc die, untreated
• Insert zinc die, chrome plated
• Escutcheon PA, black
• Cam zinc die, untreated
• Flat rods steel, zinc plated
• Rod Guide PA, blacK
• Grounding clip stainless steelAISI 304

• Rod latch system for application within the sealed area.
• The latch can be used with escutcheon, handles or swinghandles.
• RH or LH application.
• Detailed dimensions of the cutout PrA see product system 3-010.

• Latch, rods, inserts, escutcheon, cams and adapter stainless steel AISI 316
• Grounding clip stainless steel AISI 301
• Ramp-shoe PA, black
• Inserts stainless steel AISI 303

• Rod latch system for round rods.
• Both flat rods of the rod latch system have to be guided additionally.
• In this configuration both round rods have the same length.
• The 4 weldstuds for the rod guides are positioned exactly in the line with the center of the latch system.
• Detailed dimensions of the cutout PrB see product system 3-010.

• Rod latch zinc die, untreated steel, zinc plated
• Rod guide PA, black
• Rod guide zinc die, black
• Round rods steel, zinc plated PA black

• Rod latch system to control round or flat rods.
• Installation with or without cam.
• For application within the sealed area.
• Also for application outside the sealing within the bending area.
• RH or LH application through double symmetry.
• Detailed dimensions of the cutout PrA see product system 3-010.
• Stroke 24mm 0.945inch / 31.4mm1.236inch.
• Water and dust-tight according to IP65 DIN EN 60529 by: O-ring 208-1801 and 208-1802.
• Grounding by Grounding clip 208-1206.93.

• Housing PA, black / zinc die, untreated
• Pinion zinc die
• Rods steel, zinc plated
• Insert zinc die, chrome plated
• Escutcheon PA, black
• Cam zinc die, untreated

• Rod latch system for application within the sealed area.
• The latch can be combined with escutcheons, handles or Swinghandles.
• RH or LH application.
• Detailed dimensions of the cutout PrC see product system 3-010.
• Water and dust-tight according to IP65 DIN EN 60529 by O-ring 208-1801 and 2x O-ring 208-1802.
• Grounding by Grounding clip 208-1206.93.

• Housing zinc die, untreated steel, zinc plated or PA, black
• Pinion zinc die
• Rods steel, zinc plated
• Insert zinc die, chrome plated
• Escutcheon PA, black
• Cam zinc die, untreated
• Rod Guide PA, black

• The slam latch for aluminium profiles or flush/nested doors consists of two units: The handle part with slam-bolt and the frame-part.
• This frame-part catches the slam-bolt and is also the limit stop for the door.
• In this way, different profile widths can be connected with each other.
• Gently pulling the handle will disengage the slam-bolt.
• A gentle push will latch the door.
• The complete unit is fastened with 4 screws M6 e.g. DIN 912, not included into sliding tenon nuts which are included.
• All lockable slam latches are supplied with 2 keys.
• Combined versions chrome plated/black on request.

• Door- and frame housing zinc die, chrome plated or black
• Handle zinc die, chrome plated or black
• Bolt zinc die, untreated
• Tenon nut steel, zinc plated

• Application in air conditioning technology.
• b) and d) captive by O-ring.

• Rod Latch system for mounting into flange of door, outside the sealed area
• Very smooth sealing compression and latching is achieved by brass dual roller catches with large ramp the dual rollers are mounted onto Flat Rods size 14x3mm (0.551x0.118)
• RH and LH application through double symmetry
• The direction of opening, which depends on the type of handle /insert, can be changed by rotating the central Rod Latch which has double symmetry
• Detailed dimensions of the cutout PrC see product system 3-010

Material:

• Rod latch: zinc die
• Dual rollers: brass
• Dual hook: zinc die
• Dual hook: PA, black
• Rod guide: PA, black
• Rod guide: zinc die
• Escutcheon: PA, black
• Insert: zinc die, chrome plated
• Handles: PA, black, zinc die, untreated
• Swinghandle and dish: PA, black
• Grounding clip: stainless steel
• AISI 304

Our company is widely appreciated in the field of providing high tech Slam Latches throughout the market in a very specific and expanded variety. There is a high demand for these latches in market by our customers. These latches are well known for their superior performance and tensile strength. We use supreme quality material for making these latches. Last but not least, our customers can avail these latches easily at competitive rates.

Features:

• Slam-latch for doors and panels
• Slam-latch for doors and panels, can be opened by key or handle
• The slam-latch is screwed onto the latch support
• Which is either screwed or, in case of heavy application, welded to the door
• If assembled without insert it can be opened with tapered square key
• The slam bolt has a slam feature

Material:

• Housing: steel, zinc plated
• Bolt: zinc die, zinc plated
• Lock support: steel, zinc plated

Specifications:

• The slam latch for aluminium profiles.
• 2-parts: door-part and frame-part. This door-part catches the slam-bolt and is also the limit stop for the frame-part.
• Due to oblong holes, different profile widths can also be used.
• Gently pulling the handle will disengage the slam-bolt.
• A gentle push will latch the door

• The closing process in two steps:
• 1. A 90° turn of the Swinghandle brings the cam into the locked position.
• 2. With another 45° turn the cam is pressed by 4mm against the clamping surface.
• Constant contact pressure over the entire edge length.
• Installation within the sealed area.
• Single or multi-point latching by using of additional latching devices.
• The connecting rods between the latching devices can be fixed easily in clamps.
• Oblong hole allows tolerance compensation of the housings.
• Usable with Swinghandles PrC,  Please contact DIRAK.
• RH and LH Version.

• Housing, rods, clamps, pinion: zinc die

• Retractable T-handle with 90° rotation to control flat rod closing systems in our 208-Series.
• The design and layout of the T-handle in combination with the very narrow gap dimensions, make this handle tamper-proof and in addition the low profile design prevents the handle to be used as climbing step aid. The locking cylinder can not be forced inwards by axial forces.
• The retractable T-handle is kept latched on 2 positions.
• The T-handle can not be folded down if not in line with the housing.
• All possible locking devices or cylinders are located in a separate locking device sub-assembly. This sub-unit can be adapted for: Eurocylinders, KABA-cylinders, Key-cylinders, inserts. These with or without a padlock.
• In the open position, this locking device sub-unit can easily be removed or installed.
• The complete handle can be applied for closing systems inside or outside the sealed area.
• RH and LH applications.
• Water- and dust-tight according to IP65 DIN EN 60529. The complete unit has a condensation- and rainwater drainage.
• Complies with security test to WKII DIN 1630.
• RAL 7032 - Prices and delivery time on request.
• Rods on request.

• Dish, T-handle, cover, insert and spacer zinc die, black or RAL 7032
• Flat rod and rod stub steel
• Padlock eye stainless steel AISI 304
• O-Ring NBR, black

• The Pull Latch Handle is used by 19" engineering for locking insertions
• The completely pre-assembled unit is fastened by a countersunk screw M4
• LH and RH application
• When inserting the plug-in unit the free running slam hook latches into the appropriate cutout and locks the plug-in unit with the frame
• Drawing at the handle unlocks the plug-in unit and it can be pulled out by the handle

• The Pull latch handle is used by 19" engineering for locking insertions.
• The completely pre-assembled unit is fastened by a countersunk screw M4.
• LH and RH application. When inserting the plug-in unit the free running slam hook latches into the appropriate cutout and locks the plug-in unit with the frame.
• Drawing at the handle unlocks the plug-in unit and it can be pulled out by the handle.
• The countersunk screw is not included.