Dirak India Panel Fittings Pvt. Ltd.

Our company has set benchmark in the field of Stainless Steel Quarter Turn Locks in market. We have a wide gamut of these quarter turn locks available in different customized shapes and designs offered in market. These turn locks are made from best quality material and latest technologies. Moreover, these turn locks are highly durable and corrosion resistant body. These turn locks give high performance and are very sturdy. At the end, these turn locks are available at competitive prices in market.

Features:

• Quarter-Turn with tapered insert, operated by a so-called "Bern" key
• RH or LH application
• Water- and dust-tight according to IP65 DIN EN 60529
• This Quarter-Turn consists of three basic parts which can be combined to suit your application
• A pre-assembled Quarter-Turn can be installed in the cutout
• On request parts can be assembled by DIRAK

Material:

• Housing: zinc die, chrome plated or black
• Insert: steel, zinc plated, or zinc die, chrome plated
• Cam: steel, zinc plated

Specifications:

• Quarter-Turn with L-handle.
• RH / LH application. Versions without cylinder are water- and dust-tight according to IP65 DIN EN 60529.
• Versions with cylinder are water- and dust-tight according to IP54 DIN EN 60529.
• The Quarter-Turn consists of two basic components which can be combined to suit your application.
• On request parts can be assembled by DIRAK.
• A pre-assembled Quarter-Turn can be installed in the cutout.
• All lockable L-handles supplied with two keys

• Nicely shaped Quarter-turn with 12mm 0.472 housing.
• Sleek, nearly flush bezel.
• RH or LH application.
• This Quarter-turn consists of three basic parts which can be combined to suit your application.
• On request parts can be assembled.
• The Quarter-turn can be screwed into the cutout with the pre-assembled cam.
• Grounding is possible with use of a grounding nut.
• Note: to be aimed at H ≥ 6mm
• Water- and dust-tight according to IP65 DIN EN 60529 by using: O-ring 200-1001 and flat external seal 200-0901.

• Housing and inserts zinc die, chrome plated or black
• Cams and nut steel, zinc plated
• Grounding nut zinc die, untreated

Advantages:

• Flush version
• Housing length 12mm (0.472).
• RH / LH application. Please configure the Quarter-Turn with insert and cam.
• On request parts can be assembled. The Quarter-Turn can be screwed into the cutout with the pre-assembled cam.
• Grounding by single-sided grounding nut (optional).
• IP65 according to DIN EN 60529 by using sealing kit.

• Polyamide Quarter-turn double insulated.
• RH or LH application.
• Pre-assembling by DIRAK is advisable.
• A pre-assembled Quarter-turn can be installed in the cutout.
• Water and dust-tight according to IP65 DIN EN 60529 by using: O-ring 200-1001 and flat external seal 200-0901.
• Water and dust-tight according to IP67 by additional O-ring 200-1002.

• Housing, insert and cam: PA, black

• Cylinder Quarter-turn, double insulated and vibration-proof.
• RH or LH application.
• On request parts can be assembled by DIRAK.
• A pre-assembled Quarter-turn can be installed in the cutout.
• All locks supplied with two keys.
• Water and dust-tight according to IP65 DIN EN 60529 by dust cap 200-4101.
• Water and dust-tight according to IP65/67 DIN EN 60529 by Staubkappe 200-4101.
• Water and dust-tight according to IP65/67 DIN EN 60529 by dust cap 200-4103.

• Housing PA, black
• Cam PA, black
• Finger pull PA, black

• Elegant, flush Quarter-turn for Snap-in installation into cutout 32x20.1mm.
• Especially narrow design.
• A pre-assembled quarter-turn can be fitted through the cutout.
• Installation by a simple push into the cutout.
• Tool-less installation.
• Vibration-proof.
• Blind installation.
• Rectangular cutout guarantees a perfect alignment.
• LH and RH application.
• The rotatable bottom can be positioned in any 90° position, making the bit of the key always pointing in the same direction for both RH and LH doors.
• Pre-assembly upon request.
• Attention:
• H-dimension of the cam L35 not less than 12mm 0.472
• H-dimension of the cam L45 not less than 6mm 0.236
• Grounding by grounding clip 200-1103.04-00000

• Housing and cylinder zinc die, chrome plated
• Snap wedges sintered steel
• Loose bottom zinc die, zinc plated
• Serrated screw and cam steel, zinc plated
• O-Ring NBR, black, serves as security for the snap wedges

• Quarter-Turn for cutout Pr20.1.
• Lockable by a padlock.
• RH / LH application.
• IP65 according to DIN EN 60529 by sealing kit.
• Grounding by grounding nut.
• Please configure the Quarter-Turn with insert, (adapter) and cam.
• On request parts can be assembled. 
• The Quarter-Turn can be screwed into the cutout with the pre-assembled cam. 
• Negatively bent cams can not be installed pre-assembled.

We are a trusted and highly acclaimed company indulged in Safety Quarter Turn Lock in market. We offer our customers a diversified variety of reliable and unique safety quarter turns. These turns are available in various dimensions and designs as demanded by our customer. We use best quality material and safe techniques to make these quarter turns more unique and accurate. Lastly, these quarter turns are available at market leading prices for our valuable customers.

Features:

• Nicely shaped safety Quarter-Turn
• Sleek, nearly flush bezel
• Vibration-proof also at high sealing pressure
• Fully closed external surface
• Water- and dust-tight according to IP65 DIN EN 60529
• RH or LH application
• A pre-assembled Quarter-Turn can be inserted through the cutout
• On request cam b) can be pre-assembled by DIRAK
• Attention: An assembled cam will have some axial play on the insert. This play is necessary to neutralize tipping of the insert at high compression forces. This tipping will squeeze the spring loaded link

Material:

• Housing, insert, spring loaded link and nut: stainless steel AISI 303
• O-Ring and flat seal: NBR Perbunan
• Serrated screw and spring: stainless steel

Specifications:

• Please configure the Quarter-Turn with insert and cam.
• On request parts can be assembled by DIRAK.
• A pre-assembled Quarter-Turn can be installed in the cutout.
• Max. IP54.

• Fixing clip
• Grounding clip

• On LH doors the opening direction is clockwise.

• RH / LH application.
• Please configure the Quarter-Turn with insert and cam.
• On request parts can be assembled.
• A pre-assembled Quarter-Turn can be
• installed in the cutout and combined with
• the finger pull of product system 1-060.
• When using finger pull (b) the Hdimension decreases by 0.8mm!
• IP65 according to DIN EN 60529 by using sealing kit.

• Cylinder Quarter-Turn with 90° rotation, nut fixing.
• For cutout 14.1, housing length 13.5.
• RH / LH application.
• A pre-assembled Quarter-Turn can be installed in the cutout.

• Quarter-Turn with wing knob. For cutout 14.1, housing length 13.5, with cylinder.
• RH / LH application. Please configure the Quarter-Turn with a cam.
• A pre-assembled Quarter-Turn can be installed in the cutout.
• All locks supplied with two keys.

• Flat external seal
• Grab-collar

• Quarter-Turn clipped in.
• Tool-less installation. Secure fixation in the cutout with 2 clip-in noses.
• RH / LH application. Please configure the Quarter-Turn with a cam.
• A pre-assembled quarter-turn can be installed in the cutout.
• The 2 clip-in noses (refer to drawing) must be able to move inwards during installation.
• The Quarter-Turn can only be clipped into the cutout when it is open.

• Clamping Quarter-Turn with 6mm compression stroke.
• For cutout 21.6.
• RH / LH application.
• Vibration-proof.
• The closing process is always clockwise. By turning the insert 90° the cam is at first put into closed position.
• Continuing rotation to the right (5x) will pull the cam towards the door.

• Flush Quarter-Turn for cutout 30x30mm.
• Installation tool-less and vibration-proof.
• Blind installation. Rectangular cutout guarantees a perfect alignment.
• RH / LH application. IP65 according to DIN EN 60529 by sealing kit.
• Grounding by grounding clip (optional). Please configure the Quarter-Turn with insert and cam.
• Available pre-assembled on request. The Quarter-Turn can be snapped-in as a completely pre-assembled unit.

• Attention: H-dimension not less than ≥ 14mm (0.551)!
• The cutouts can be provided with an indentation to avoid errors

• Elegant, flush Quarter-turn for Snap-in installation into cutout 32x20.1mm.
• Pre-assembled Quarter-turn can easily be snapped-in.
• Vibration-proof.
• Blind installation.
• Rectangular cutout guarantees a perfect alignment.
• LH and RH application bottom with 90°-stop can be rotated.
• Pre-assembly upon request.
• Water- and dust-tight according to IP65 DIN EN 60529 by O-rings are included.
• Attention: H-dimension of the cam not less than 12mm 0.472
• Please contact DIRAK for part no. of a completely pre-assembled SNAP-LINE Quarter-turn.
• Grounding by grounding clip 200-1101.04-00000.

• Flush Quarter-Turn for cutout 32x20mm.
• Installation tool-less and vibration-proof.
• Blind installation in closed profiles.
• Rectangular cutout guarantees a perfect alignment.
• RH / LH application by rotatable bottom part. 
• IP65 according to DIN EN 60529 (o-ring for housing is included). O-ring 200-1001.00-00000, for insert, please order separately.
• Grounding by grounding clip (optional).
• Please configure the Quarter-Turn with insert and cam.
• On request parts can be pre-assembled
• The Quarter-Turn can be snapped-in as a completely pre-assembled unit.

• Flush safety Quarter-Turn for cutout Pr20.1.
• Vibration-proof according to DIN EN 61373 also at high sealing pressure, by built-in spring loaded link.
• Completely closed housing surface.
• RH / LH application.
• IP65 according to DIN EN 60529.
• Grounding by single-sided grounding nut. Please configure the Quarter-Turn with a cam.
• Completely pre-assembled without cam. The Quarter-Turn can be screwed into the cutout with the pre-assembled cam.

• Quarter-Turn for cutout Pr20.1. Operation not possible without an appropriate key.
• The key is removable in 90° steps.
• RH / LH application.
• IP65 according to DIN EN 60529.
• Grounding by grounding nut. Please configure the Quarter-Turn with a cam.
• Completely pre-assembled without cam. The Quarter-Turn can be screwed into the cutout with the pre-assembled cam.

• Escutcheon
• Grounding nut

• Flush Quarter-Turn for cutout 32x20mm.
• Installation tool-less and vibration-proof.
• Blind installation in closed profiles. Rectangular cutout guarantees a perfect alignment.
• Operation not possible without an appropriate key.
• The key is removable in 90° steps.
• RH / LH application.
• IP65 according to DIN EN 60529.
• Grounding by grounding clip (optional). Please configure the Quarter-Turn with a cam.
• Completely pre-assembled without cam. The Quarter-Turn can be snapped-in as a completely pre-assembled unit

Remarks:

• ATTENTION: H-dimension of the cam not less than ≥12mm(0.472)!
• Escutcheon
• O-Ring

• Polyamide Quarter-Turn for cutout Pr20.1.
• Protective insulated.
• RH / LH application.
• With moulded-in TPE seal (under the
• head and inside the housing).
• The TPE seal is captive.
• IP65/67 according to DIN EN 60529.
• IP69K according to DIN 40050.
• Please configure the Quarter-Turn with
• nut, insert and cam.
• Insert and cam can be clipped together
• without tools before the installation in the
• housing.
• A pre-assembled Quarter-Turn can be
• installed through the cutout.

• Polyamide Quarter-Turn for cutout PrA.
• Clip-in installation.
• Tool-less installation. RH / LH application by rotatable bottom part.
• IP65 according to DIN EN 60529 by sealing kit.
• Grounding by grounding clip. Please configure the Quarter-Turn with insert and cam.
• Also a 3-point cam can be preassembled.
• The Quarter-Turn can be clip-in as a completely pre-assembled unit.

• Attention: H-dimension of the cam not less than ≥16mm (0.630) Rotatable bottom
• Sealing kit (s) Clamping range see table By using additional extensions PS 3-136 this Quarter-Turn can also be applied for cutouts B and C

• Quarter-Turn for cutout Pr20.1.
• RH / LH application. IP65 according to DIN EN 60529 by sealing kit 209-9002.00-00000.
• IP67 according to DIN EN 60529 by sealing kit 209-9001.00-00000.
• Grounding by grounding clip or grounding nut (optional).
• Please configure the Quarter-Turn with insert and cam.
• On request parts can be assembled. The Quarter-Turn can be screwed into the cutout with the pre-assembled cam.

• Nut
• Grounding nut
• Grounding clip

• Flush Quarter-Turn for cutout Pr20.1.
• RH / LH application. IP65 according to DIN EN 60529 by sealing kit 209-9002.
• IP67 according to DIN EN 60529 by sealing kit 209-9001.
• Grounding by grounding clip or grounding nut (optional).
• Please configure the Quarter-Turn with insert and cam.
• On request parts can be assembled. The Quarter-Turn can be screwed into the cutout with the pre-assembled cam.

• PA Quarter-Turn for cutout PrA.
• Installation tool-less and vibration-proof.
• Blind installation in closed profiles. Rectangular cutout guarantees a perfect alignment.
• RH / LH application by rotatable bottom part.
• IP65 according to DIN EN 60529 (o-ring for housing is included). O-ring 200- 1001.00-00000, for insert, please order separately.
• Grounding by grounding clip (optional). Please configure the Quarter-Turn with insert and cam.
• Also a 3-point cam can be preassembled.
• The Quarter-Turn can be snapped-in as a completely pre-assembled unit.

• Quarter-Turn for cutout Pr20.1.
• With integrated finger pull. RH / LH application by rotatable bottom part.
• IP65 according to DIN EN 60529 by sealing kit 209-9002.00-00000.
• IP67 according to DIN EN 60529 by sealing kit 209-9001.00-00000.
• Grounding by grounding clip (optional).
• Please configure the Quarter-Turn with insert and cam.
• On request parts can be assembled.
• The Quarter-Turn can be screwed into the cutout with the pre-assembled cam

• Extended Quarter-Turns for cutout Pr20.1.
• RH / LH application. IP65/67 according to DIN EN 60529 by sealing kit.
• Grounding by grounding nut (optional). Please configure the Quarter-Turn with insert (adapter) and cam.
• On request parts can be assembled. The Quarter-Turn can be screwed into the cutout with the pre-assembled cam.
• Negatively bent cams can not be installed pre-assembled.
• By using inserts the adapter is optional, by using knobs the adapter is necessary.

• Cylinder Quarter-Turn for cutout Pr20.1.
• RH / LH application. IP65 according to DIN EN 60529 only by dust cap 200-4101.
• IP65/IP67 according to DIN EN 60529 only by dust cap 200-4103.
• Grounding by grounding nut. Please configure the Quarter-Turn with a cam.
• Completely pre-assembled without cam. The Quarter-Turn can be screwed into the cutout with the pre-assembled cam
•  2 keys included. With stainless steel cylinder cover and dust-shutter.
• Maximum load for the key 4Nm.

• Flush Cylinder Quarter-Turn for cutout Pr20.1.
• Different housing lengths.
• RH / LH application. IP65 according to DIN EN 60529 only by dust cap 200-4101.
• IP65/IP67 according to DIN EN 60529 only by dust cap 200-4103.
• Please configure the Quarter-Turn with a cam.
• Completely pre-assembled without cam. The Quarter-Turn can be screwed into the cutout with the pre-assembled cam.
• Negatively bent cams can not be installed pre-assembled
• 2 Keys are included in the scope of delivery.
• With stainless cylinder cover and dustshutter.
• Maximum load for the key 4 Nm.

• Adapter
• Dust-shutter
• Cylinder cover
• (s) Door-thickness see table

• Flush-mounted Quarter-Turn for cutout Ø22mm.
• With the PA nut M22 x 1.5mm, the housing is put exactly into position and secured with the anti-rotation device. Precise detent for optimized alignment.
• In conjunction with the stop plate, stop less constructions with aluminum profiles and/or with flat components can be latched perfectly.
• Vibration-proof according to DIN EN 61373.
• RH / LH application. Please configure the Quarter-Turn with insert, (adapter) and cam.
• By using inserts the adapter is optional, by using knobs the adapter is necessary

• Quarter-Turn with T-handle.
• With or without cylinder.
• RH or LH application.
• Versions without cylinder are water- and
• dust-tight according to IP65 DIN EN60529.
• Versions with cylinder are water- and
• dust-tight according to IP54 DIN EN60529.
• The Quarter-Turn consists of two basic
• components a) and b) which can becombined to suit your application.
• On request parts can be assembled by DIRAK.
• A pre-assembled Quarter-Turn can be installed in the cutout.
• All lockable T-handles supplied with two
• keys.

• Bowed handle with DIRAK-SNAPTechnology and Quarter-turn, with cylinder or for insert.
• Tool-less, vibration-proof installation also in closed profiles.
• Rectangular cutout guarantees a perfect alignment.
• The installation is effected by a simple push into appropriate cutouts.
• The Housing for cylinder or insert can be turned by 90° and the handle can be used for RH/LH, horizontal and vertical applications. On request pre-assembled available.

• Safty Quarter-Turn for cutout Pr20.1. Vibration-proof also at high sealing pressure through an integrated latch.
• Completely closed housing surface.
• RH / LH application.
• IP65 according to DIN EN 60529.
• Grounding by single-sided grounding nut. Please configure the Quarter-Turn with a cam.
• Completely pre-assembled without cam. The Quarter-Turn can be screwed into the cutout with the pre-assembled cam.
• Attention! Also the black version always has the spring loaded link, escutcheon and insert in chrome plated.

• HD Compression Latch with 6.5mm compression.
• RH or LH application.
• Vibration-proof.
• This Quarter-turn consists of three basic parts which can be combined to suit your application.
• By turning the insert 90° the cam is at first put into closed position.
• By turning a further 90°, the cam will be pulled towards the frame.
• Matching dots mark the final position see lower drawing.
• The H-dimension can be easily adjusted by the adjusting screw.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Typical assembling please refer to Instruction 4.

• Housing zinc die, chrome plated or black
• Insert brass, chrome plated, zinc die, black or chrome plated
• Drip handle: zinc die, black
• Spring stainless steel
• Cam zinc die, chrome plated
• Adjusting screw steel, zinc plated
• Nut steel, zinc plated

• Especially narrow design.
• A pre-assembled quarter-turn can be
• fitted through the cutout.
• Installation by a simple push into the
• cutout.
• Tool-less installation.
• Vibration-proof.
• Blind installation.
• Rectangular cutout guarantees a
• perfect alignment.
• LH and RH application.
• The rotatable bottom can be
• positioned in any 90° position, making
• the bit of the key always pointing in
• the same direction for both RH and
• LH doors.
• Pre-assembly upon request.
• Grounding see d)

• H-dimension of the cam
• L=35 ≥ 12mm (0.472)
• H-dimension of the cam
• L=45 ≥ 6mm (0.236)

• Flush safety Quarter-Turn for cutout
• 32x20mm.
• Vibration-proof also at high sealing
• pressure through an integrated latch.
• Installation tool-less and vibration-proof.
• Blind installation in closed profiles.
• Rectangular cutout guarantees a perfect alignment.
• Completely closed housing surface.
• RH / LH application.
• IP65 according to DIN EN 60529.
• Grounding by grounding clip (optional).
• Please configure the Quarter-Turn with a cam.
• Completely pre-assembled without cam.
• The Quarter-Turn can be snapped-in as a completely pre-assembled unit

• Quarter-Turn for cutout Pr20.1.
• Lockable by a padlock.
• RH / LH application.
• IP65 according to DIN EN 60529 by sealing kit.
• Grounding by grounding nut.
• Please configure the Quarter-Turn with insert, (adapter) and cam.
• On request parts can be assembled.
• The Quarter-Turn can be screwed into the cutout with the pre-assembled cam.
• Negatively bent cams can not be installed pre-assembled.

• Quarter-Turn with L-handle.
• RH / LH application.
• IP65 according to DIN EN 60529. Please configure the Quarter-Turn with a cam.
• On request parts can be assembled. A pre-assembled Quarter-Turn can be installed in the cutout.
• All lockable L-handles supplied with two keys.
• Price and delivery time on request

Backed by professionalism and proficiency in its field, our company is most reliable in offering Polyamide Quarter Turns in market. We have n extensive demand for these quarter turns by our customers for their unique structure and sturdy construction. These quarter turns are available in wide variety of designs and size according to the orders. Last but not the least, these poly-amide quarter turns can be easily availed from market at customized prices.

Specifications: