Dirak India Panel Fittings Pvt. Ltd.

Our company is widely appreciated in the field of Stainless Steel Swing Handles. We offer a plethora of designs and patterns in this category. There is an extensive demand for these handles by our customers due to their innovative designs and unique structure. These are made from reliable quality material and expert knowledge. We offer our customers a diverse range of these handles. Lastly, these handles are offered for sale at minimum prices in market.

Features:

• Swing handle for application with rod latch system see product system 7-040 and cutout version C 50x25 mm
• Water- and dust-tight according to IP65 DIN EN 60529 within the sealed area
• Detailed dimensions of the cutout see product system 3-010

Specifications:

• The appealing design guarantees a firm and reliable grab.
• The closed surface makes it insensitive to dirt and easy to clean.
• Designed for vertical or horizontal uses.
• The installation is effected by a simple push into appropriate cutouts.
• Handle for variable lengths in the same design see product system 6-1600SL.
• Vibration-proof

• Bridge Handle PA, black
• Cap PA black

We are among the most reputed companies dealing in the Snap Line Swing Handles in market. There is a very high demand for these swing handles by our customers for their unique designs and highly reliable nature. These handles are made from latest technologies and expert knowledge. We use innovative techniques for differentiating our handles from others. Last but not least, these handles are available at cost effective prices in market.

Features:

• Pull handle with slam-hook SNAP-LINE
• Closing operation: push handle into the dish, lock the barrel and slam the door closed. (the spring- loaded hook is free- running)
• LH and RH application
• A non-locked handle has a detent in the door-dish
• Installation: Hook lower part into the lower cutout. Snap top part into the upper cutout with a simple push

Material:

• Dish: PA, black
• Bolt/hook: zinc die, untreated
• Locking cylinder: PA

Specifications:

• Dual cylinder swing handle with pivotable operating lever.
• Fully insulated for installation in plastic cabinets.
• Profile cylinders
• Latch bolt securely locked against unauthorized opening by metal sheet.
• Cylinder cover strengthened by two rips.
• Sealable by holes in the cover.
• Upgrading with steel insert (saw protection) possible.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Two different latch bolt versions are available:
• a) Latch bolt with chamfer. Closing is possible if key is removed.
• b) Latch bolt with detent. Detent requires forced closing. Locking only possible by turning the key.

• Swinghandle and dish PA, black
• 3- and 2-point cam and round rods steel, zinc plated
• Adapter zinc die, zinc plated or PA, black
• Rod guide PA, black
• Square adapter PA, black
• Flat external seal sponge rubber, pure

• Polyamide handle, two sizes.
• Fastening with cap screws or hexagon head screws (version a) or with countersunk head screws (version a1).
• New versions please refer to product system 6-1000.

• Bridge handle PA, black

Our company has received immense accolades for its contribution in offering high quality Rod Latching Systems in market. We have a full fledged variety of these latching systems in different specifications as per the customer's demand. Moreover, these latching systems are made by using premium quality material and high grade technological methods. These latching systems are very convenient and durable. Having all this, these products are available easily at affordable prices in market.

Features:

• Rod Latch system for round rods
• Both flat rods of the rod latch system have to be guided additionally
• In this configuration both round rods have the same length
• The 4 weld studs for the rod guides are positioned exactly in the line with the center of the latch system
• Detailed dimensions of the cutout see product system 3-010

Material:

• Rod Latch: zinc die, untreated/steel, zinc plated
• Rod Guide: PA, black
• Rod Guide: zinc die, black
• Round rods: steel, zinc plated/PA black

Specifications:

• Solid aluminium handle, modern industrial design.
• Handles for hospital equipment, medical and food processing technology.
• Designed for vertical or horizontal uses.
• For screws M8.
• Additional lengths on request.

• Bridge handle aluminium, anodized natural silver
• Other surfaces on request.

Our company excels in the domain of 3 Point Lock Swing Handles all over the market. We have an attractive and unique range of these lock handles available in a wide variety of customized size and shapes. These lock swing handles are very durable and gives high performance for a fairly long period. Our experts use superior quality material for these handles. In addition to this, these handles are available in market at pocket friendly prices.

Features:

• Swing handles TRIMLINE for Rod Latch and Flat Rods
• RH or LH application
• Water- and dust-tight according to IP65 DIN EN 60529
• Version for 3-point cam sees product system 2-070
• Detailed dimensions of the cutout PrB see product system 3-010
• Swing handle: zinc die, chrome plated or black
• Dish: zinc die, chrome plated or black or PA, black
• Padlock eye: stainless steel
• Insert: zinc die, chrome plated
• Rod Latch: zinc die
• Cam: steel, zinc plated

Material:

• Dish: zinc die, chrome plated or black or PA, black
• Padlock eye: stainless steel

Specifications:

• Anti-corrosive
• Cut-out version PrC 50x25mm
• Padlock device with rectangular base is fitted from the rear

• Swinghandle TRIMLINE for 3-point cam and round rods.
• RH or LH application.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Version for Rod latch and Flat rods see product system 3-070.
• Detailed dimensions of the cutout PrB see product system 3-010.
• Inserts must be ordered separately, see c). Locking stub included in handle assembly.
• Grounding by grounding clip 208-1206.93

• Swinghandle: zinc die, chrome plated or black
• Dish zinc die, chrome plated or black or PA, black
• Padlock eye stainless steel AISI 316
• Swinghandle zinc die, chrome plated or black
• Dish zinc die, chrome plated or black or PA, black
• Padlock eye stainless steel AISI 316
• Insert zinc die, chrome plated
• 3-point cam steel, zinc plated
• Round rods steel, zinc plated
• Adapter zinc die, untreate
• Rod guide PA, black
• Grounding clip: stainless steel AISI 301

Advantages:

• Swinghandle TRIMLINE for 3-point cam and round rods.
• RH / LH application.
• IP65 according to DIN EN 60529.
• Version for rod latch and flat rods see product system 3-070.
• Inserts must be ordered separately, see c). Locking stub included in handle assembly.
• Grounding by grounding clip 208-1206.93-0000

• Swinghandle for cam and 3-Point cam SNAP-LINE.
• This swinghandle has the shape of the Trim-Line handle and can be installed with the single or 3-point cam already pre-assembled by DIRAK.
• Grounding by grounding clip.
• A non-locked handle has a detent in the door-dish.

• Dish PA, black
• Handle and turning-disk zinc die, black
• Bottom (90° base) LH/RH zinc die, zinc plated
• Grounding clip stainless steel
• Locking cylinder PA
• Snap wedges PA

Advantages:

• Swinghandle TRIMLINE with pull-andswing handle for cylinder barrel.
• 90° Closing rotation.
• RH / LH application.
• For cam and 3-Point cam.
• Tool-less installation.
• The dish is hooked into the lower cutout
• and snaped into the upper cutout.
• On request available with pre-assembled
• cam / 3-point cam.
• Grounding by assembled grounding clip.
• A non-locked handle has a detent in the
• door-dish.

• LED module visualises the locking position.
• Regular red flashing indicates open position.
• Tool-less assembly.
• Tool-less installation, self-locking (clip-in) in sheet metal with thickness of 1.5 or 2.5mm.
• Independent of panel thickness up to 4mm.155
• Closing with slam latch.
• Handle with lifting spring.
• Tool-less replacement of the cylinder cover.
• Water- and dust-tight according to IP65 DIN EN 60529 by optional IP-set.
• RH and LH application.
• Battery CR2032 3V not included.

• Handle, dish, cap: PA, black, halogen-free
• Dust cover PA, black

• Uses 3-point cams and round rods
• Opening rotation is 90°
• Uses profile cylinders 40mm with 45° locking cam
• Water and dust tight according to IP65, DIN EN 60529
• RH and LH application
• Dimensions of cutout PrC - see Product System 3-010
• Other swinghandle versions available - see Product System 2-090 (PA/Zinc Die)
• Other round rod - see Product System 2-090, 2-090SL and 7-065
• Tool-less installation - see Product System 2-090SL and 3-150SL
• Flat rod version - see Product System 3-150, 3-150SL, 3-151 and 7-060
• Stainless steel - see Product System 7-060 and 7-065

• Swinghandle with closing rotation 90°.
• RH / LH application.
• Fully insulated.
• IP65 according to DIN EN 60529.
• Profile-cylinder according to DIN 18252.
• Use of KABA-cylinder.
• Use of Padlocks

• Low profile design.
• Cylinder barrel DIRAK 1333 with stainless steel dust cap.The pre-assembled Swinghandle (single or 3-point cam) can simply be snapped into the cutout.
• RH / LH application is achieved by the rotating bottom with limiting stop at 90°
• Key with synthetic coated grip
• H-dimension of cam ≥ 10mm

• Guide Swinghandle with pre-assembled cam through cutout
• Put lower hook into position and snap upper part into final position
• Final position fully snapped
• Rotating bottom

• Uses 3-point cam and round rods
• Low profile design
• Pre-assembled swinghandle (single or 3-point cam) can be inserted into
• cutout and with simple push secured in panel
• Limiting stop at 90° prevents the cam from being over rotated
• RH and LH application
• Water and dust tight according to IP65, DIN EN 60529
• Uses round cylinder DIRAK 1333 with stainless steel dustcap. Key has synthetic coated grip

• Swinghandle-SOFTLINE for 1-, 2- or 3-point locking systems.
• The Swinghandle can be locked with 40mm long profile-cylinders (DIN18252), cylinder or insert.
• This Swinghandle is available with two different sliding dust covers, enabling the locking with modern profile-cylinders having a protruding key-barrel part (refer to chart).
• RH or LH application.
• For IP65 applications the lower part of the handle is fixed with a sealed cap.
• For non IP65 applications e.g. product system 3-170 the lower part has a fastening hook.
• Detailed dimensions of the cutout PrC see product system 3-010.
• Inserts must be ordered separately
• Grounding by grounding clip 208-1206.93

• Dual cylinder swinghandle with pivotable operating lever.
• Fully insulated for installation in plastic cabinets.
• Two profile cylinder allow opening by each cylinder without unlocking the other one.
• Latch bolt securely locked against unauthorized opening by metal sheet.
• Cylinder cover strengthened by two rips.
• Sealable by holes in the cover.
• Upgrading with steel insert (saw protection) possible.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Two different latch bolt versions are available:
• a) Latch bolt with chamfer. Closing is possible if key is removed.
• b) Latch bolt with detent. Detent requires forced closing. Locking only possible by turning the key

• Swinghandle and dish: PA, black
• Latch bolt stainless steel AISI 316
• 3- and 2-point cam and round rods: steel, zinc plated
• Adapter zinc die, zinc plated or PA, black
• Rod guide: PA, black
• Square adapter PA, black
• Flat external seal sponge rubber, pure

• Swinghandle SOFTLINE for application with rod latch systems.
• The Swinghandle can be locked with 40mm long profile-cylinders (DIN 18252), cylinder or insert.
• For applications with rod latch see product system 3-130, 3-132.01, 3-165 or 3-170.
• This Swinghandle is available with two different sliding dust covers, enabling the locking with modern profile-cylinders having a protruding key-barrel part (refer to chart).
• For IP65 DIN EN 60529 applications the lower part of the handle is fixed with a sealed cap. For non IP65 applications e.g. product system 3-170 the lower part has a fastening hook.
• Detailed dimensions of the cutout PrC see product system 3-010.
• Inserts must be ordered separately. Locking stub included in handle-assembly.

• Swinghandle for application with rod latch system see product system 7-040 and cutout version PrC 50x25mm.
• Water- and dust-tight according to IP65 DIN EN 60529 within the sealed area.
• Detailed dimensions of the cutout PrC see product system 3-010.
• The padlock device with rectangular base is fitted from the rear and so held captive between door skin and swinghandle body.
• This opening can be filled with a rectangular blanking plate

• Swinghandle, dish, bearing part, dust cover
• Cap PA, black
• Swinghandle shaft and padlock device stainless steel AISI 303

• Dish, Handle, Cover, Cap, rotating Disk, Spring, grooved Pin, Pin with axial knurl, locking Bolt, serrated Screw, countersunk Screw and raised
• O-Ring: NBR/Perbunan, black
• Washer: PTFE- Teflon
• Low profile, elegant swinghandle for application with rod latch system see product system 7-040.
• The design and the extremely narrow gap between handle and body makes this swinghandle suitable against vandalism.
• The low profile design prevents this swinghandle being used as climbing support.
• Locking cylinder fitted in the dish.
• A cage protects the locking cylinder from being deliberately pushed or forced through.
• Bolted internal cap is made of stainless steel.
• Easy fitting.
• Cutout 50x25mm further dimensions of cutout version PrC see product system 3-010.
• Water- and dust-tight according to IP65 DIN EN 60529.
• RH and LH application.
• Cover optional screw down.
• Cap sealing: NBR

• Dish, Handle, Cover, Cap, rotating Disk, Spring, grooved Pin, Pin with axial knurl, locking Bolt, serrated Screw, countersunk Screw and raised head Screw stainless steel AISI 316L
• Cap sealing NBR
• O-Ring NBR/Perbunan, black
• Washer PTFE- Teflon

• Low profile, elegant swinghandle to control cams and/or round rod systems.
• The design and the extremely narrow gap between handle and body makes this swinghandle suitable against vandalism.
• The low profile design prevents this swinghandle being used as climbing support.
• Locking cylinder fitted in the dish.
• A cage protects the locking cylinder from being deliberately pushed or forced through.
• Bolted internal cap is made of stainless steel.
• Easy fitting.
• Cutout 50x25mm version PrC see product system 3-010.
• Water- and dust-tight according to IP65 DIN EN 60529.
• RH and LH application.
• Cover optional screw down.

• Dish, handle, cover, cap, rotating disk stainless steel AISI 316L
• Cap sealing NBR
• O-Ring NBR/Perbunan, black
• Spring stainless steel AISI 301
• Grooved pin and pin with axial knurl stainless steel AISI 303
• Locking bolt stainless steel AISI 316
• Serrated screw and grooved pin stainless steel AISI 304
• Screws and nut stainless steel

• Low profile swinghandle. Double insulated.
• The Swinghandle can be locked with cylinders DIN 18252, cylinder, combination lock or insert.
• RH or LH application.
• Water and dust tight according to IP65 DIN EN 60529.
• Detailed dimensions of the cutout PrC see product system 3-010.
• The Swinghandles listed under a1, a2, b1, d1 and d2 can be retrofitted with a sliding cap.
• The sliding cap can be used for profile cylinders from product system 2, 140 and also for raised profile cylinders.
• Grounding by: grounding clip 208, 1206.93.

• Swinghandle PA, black or zinc die, chrome plated or black
• Dish PA, black
• Swinghandle zinc die, black
• Dish PA, black
• Swinghandle PA, black
• Dish PA, black
• Grounding clip stainless steel AISI 301

• Suitable against vandalism
• Locking cylinder fitted in the dish

• Swinghandle for 3-point cams/round rods.
• Flat design.
• The pre-assembled swinghandle (single or 3-point cam) can be inserted from the back into the cutout and secured with screws.
• The screws supplied with the swinghandle enable it to be installed in sheet-metal
• RH and LH application is achieved by the rotating bottom.
• Water- and dust-tight according to IP65 DIN EN 60529 through captive sealing.
• Swinghandle can be locked with a round cylinder DIRAK 1333 with stainless steel dust cap.
• Key with synthetic-coated grip.
• Attention: H-dimension of cam ≥16mm 0.630inch

• Swinghandle, shaft and bottom zinc die, black
• Door dish PA6, black
• Cam zinc die, untreated
• O-Ring NBR
• Seal TPE
• Screws and clamp steel, zinc plated

• Water and dust tight
• Precisely designed

• Swinghandle TRIMLINE for Rod Latch and Flat Rods.
• RH or LH application.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Version for 3-point cam see product system 2-070.
• Detailed dimensions of the cutout PrB see product system 3-010.
• Inserts must be ordered separately, see c. Locking stub included in handle-assembly.
• Grounding by grounding clip 208-1206.93.

• Swinghandle zinc die, chrome plated or black
• Dish zinc die, chrome plated or black or PA, black
• Padlock eye stainless steel
• Swinghandle zinc die, chrome plated or black
• Dish zinc die, chrome plated or black or PA, black
• Padlock eye stainless steel
• Insert zinc die, chrome plated
• Rod Latch zinc die
• Cam steel, zinc plated
• Flat rods steel, zinc plated
• Rod Guide PA, black
• Rod Guide zinc die
• Grounding clip: stainless steel AISI 301

• Swinghandle with pull-and-swing handle for profile-cylinders to DIN 18252.
• The 3 rotation-limit options allow single or multi-point cams with or without a rotation stop.
• 90° for RH doors with counter-clockwise opening.
• 90° for LH doors with clockwise opening.
• 180° for RH and LH, clockwise and counter-clockwise opening.
• The rotation stop prevents a damaging over-rotation and brings the operating handle exactly in line with the dish-cavity preventing damaging of the dish.
• The IP65 according to DIN EN 60529 will be achieved by the lower internal sealing cap. Sealings are included.
• For further locking possibilities like KABA, DIRAK 1333, combination lock and padlock eye please contact DIRAK.

• O-Rings NBR Perbunan
• Hexagon nut and washer steel, zinc plated
• Shaft brass, untreated
• Dish zinc die, untreated

• Swinghandle for series 235 (130mm / 5.118), Swinghandles in "short" version (105mm / 4.134) can only be used with rod latches see product system 1-400, stroke 13mm / 0.512!
• Part No. for these "short" versions: On request
• Part No. for grey RAL 7032 versions: On request
• IP65 according to DIN EN 60529.

• Tool-less assembly.
• Tool-less installation, self-locking (clip-in) in sheet metal with thick-ness of 1.5 or 2.0 mm.
•  Independent of panel thickness up to 4 mm.
• Closing with slam latch.
• Handle with lifting spring.
• Tool-less replacement of the cylinder cover.
• RH / LH application.
• IP65 according to
• DIN EN 60529 by optional
• sealing kit 307-9153.00-00000.

• Swinghandles and dual cylinder swinghandles for rod latches with internal release.
• With 90° closing rotation.
• IP65 according to DIN EN 60529.
• Rod latch see 2-400.01

• Low profile design. Cylinder barrel DIRAK 1333 with stainless steel dust cap.
• The pre-assembled Swinghandle (single or 3-point cam) can simply be snapped into the cutout.
• RH / LH application is achieved by the rotating bottom with limiting stop at 90°.
• H-dimension of cam ≥16 mm (0.630inch).

• Limiting stop
• Guide Swinghandle with pre-assembled cam through cutout
• Put lower hook into position and snap upper part into final position
• Rotating bottom

• Low profile design. Cylinder barrel DIRAK 1333 with stainless steel dust cap.
• The pre-assembled Swinghandle (single or 3-point cam) can simply be snapped into the cutout.
• RH / LH application is achieved by the rotating bottom with limiting stop at 90°.
• Seismic-proof according to GR-63-CORE, Issue 4.
• Vibration-proof according to DIN EN 61373.
• IP65 DIN EN 60529 by captive sealing.
• Key with synthetic coated grip.
• H-dimension of cam ≥16 mm

• Limiting stop
• Captive seal
• Guide Swinghandle with pre-assembled cam through upper cutout
• Swinghandle completely snapped in
• Rotating bottom

• DESIGN - Swinghandle with colored clip-in round or oblong inserts.
• For applications with rod latch see product system 3-130, 3-132.01, 3-161, 3-170.
• For IP65 applications the lower part of the handle is fixed with a sealed cap. For non IP65 applications e.g. product system 3-170 the lower part has a fastening hook.
• Detailed dimensions of the cutout PrC see product system 3-010.

• Swinghandle and dish PA, black
• Inserts PA
• Insert Makrolon

• Zinc die swinghandle with pivotable operating lever for profile- cylinder and round rods. For metal and plastic enclosures, 90° closing rotation.
• RH or LH application.
• Opening of the swinghandle by turning the key.
• Protected against unauthorized access by a bolt.
• Handle position clearly shows locking status.
• Suitable for profile-cylinders with length of 40 or 45mm.
• Cylinder cover magnetically secured.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Tested according to security class RCII DIN EN 1630.
• Vibration-proof according to DIN EN 61373.
• On request the swinghandle can be upgraded with an electrical system, please see

• Swinghandle, dish, dust cover and cap zinc die, black
• Bolt zinc die, brass
• Shaft stainless steel
• Washer, nut and screw steel, zinc plated
• O-Ring NBR
• 3- and 2-point cam steel, zinc plated
• Round rods steel, zinc plated
• Adapter zinc die or PA, black
• Rod Guide PA, black
• Square Adapter zinc die, zinc plated

• Swinghandle SOFTLINE for 1- 2- or 3-point locking systems.
• The Swinghandle can be locked with 40mm long Profile-Cylinders DIN 18252, cylinder or insert. Cylinder cam on 45° or 90°.
• This Swinghandle is available with two different sliding dust covers, enabling the locking with modern Profile-Cylinders having a protruding key-barrel part refer to chart.
• RH or LH application.
• For IP65 applications the lower part of the handle is fixed with a sealed cap. For non IP65 applications e.g. product system 3-170 the lower part has a fastening hook.
• Detailed dimensions of the cutout PrB see product system 3-010.
• Inserts must be ordered separately. Locking stub is included in handle-assembly.
• Grounding by grounding clip 208-1206.93

• Dual cylinder swinghandle with pivotable operating lever.
• Fully insulated for installation in plastic cabinets.
• Latch bolt securely locked against unauthorized opening by metal sheet.
• Cylinder cover strengthened by two rips.
• Sealable by holes in the cover.
• Upgrading with steel insert (saw protection) possible.
• Water- and dust-tight according to IP65 DIN EN 60529.
• Two different latch bolt versions are available:
• Latch bolt with chamfer. Closing is possible if key is removed.
• Latch bolt with detent. Detent requires forced closing. Locking only possible by turning the key.

• Swinghandle and dish: PA, black
• 3- and 2-point cam and round rods: steel, zinc plated
• Adapter: zinc die, zinc plated or PA, black
• Rod guide: PA, black

•  The Swinghandle can be locked with 40mm long profile-cylinders (DIN 18252), cylinder or insert.
• For applications with rod latch see product system 3-130, 3-132.01, 3-165 or 3-170.
• This Swinghandle is available with two different sliding dustcovers, enabling the locking with modern profile- cylinders having a protruding key- barrel part (refer to chart).
• For IP65 DIN EN 60529 applications the lower part of the handle is fixed
• with a sealed cap. For non IP65 applications e.g. product system 3-170 the lower part has a fastening hook.
• Detailed dimensions of the cutout PrCsee product system 3-010.

• RH / LH application
• Protected against unauthorized access by a bolt.
• Spring loaded, leap up handle. For profile-cylinders with length of 40 and 45 mm.
• Cylinder cover magnetically secured.
• IP65 according to DIN EN 60529. Tested according to security class RCII (DIN EN 1630).
• Seismic-proof according to GR-63-CORE, Issue 4.
• Vibration-proof according to DIN EN 61373.
• To use the same door both RH and LH, 2 holes 46, symmetrical to door center are possible.
• (S) max. 3 mm